But no matter how well you care for your car, the paint is always at risk of being damaged by rocks, insects, and other road debris.
That’s where paint protection film comes in.
Read more to learn:
- What Paint Protection Film Is
- Why Use Paint Protection Film
- The Benefits of Paint Protection Film
- How Paint Protection Film Works
What is Paint Protection Film?
Paint protection film, Buford, GA is a transparent, thin, urethane film used to protect painted automotive surfaces. It has the ability to repair on its own and serves as a shield between your paint and the weather, shielding the finish of your automobile from rock chips, scratches, and stains. Maybe you’ve wondered what that material was when you’ve seen it on the front of expensive automobiles. Well, now you know!
Paint Protection Film PPF has been used by the military for years to protect the paint on helicopters and other aircraft from the rigors of combat. So, if it can stand up to being shot at, you know it can handle a little gravel on the highway!
Why Use Paint Protection Film?
There are many reasons why you might want to use a protective film on your car. Maybe you just got a new car and want to keep the paint looking perfect. Maybe you’re taking your car to a track day and want to protect it from being hit by flying debris. Or maybe you live in an area with a lot of road construction and your car is constantly being bombarded by rocks and gravel. No matter the reason, paint protection film can help you keep your car’s paint looking like new.
Invisible Protection.
The unique clear coat that is applied to your vehicle during paint protection film installation not only offers outstanding protection against UV rays, but it also safeguards the painted surface from nicks, dings, road debris, and other forms of damage caused by the surrounding environment.
Stone Chip Protection.
Even the most well-maintained car is susceptible to damage over time from stone chips caused by flying debris. When you have an automotive paint protection film installed on your car, it will not only protect against light scratches but will also provide a valuable level of protection from flying items that would otherwise lead to expensive repairs in the future.
Protection Against Contaminants
The paint protection film shields the vehicle’s clear coat from the destructive effects of ultraviolet (UV) rays, dirt, debris, and other forms of road filth. In the warmer months, this protective covering helps keep your car at a more comfortable temperature.
Vehicle Color Enhancement
Your automobile will benefit from an increased level of protection from the color-matched paint protection films, and the finished product will have an upscale appearance as a bonus. The clear coat not only produces a slick surface but also brings out the vibrant hues of the vehicle’s original paint job.
The Benefits of Paint Protection Film
The layer of paint protection that is currently present on your vehicle is a factory-grade clear coat, which is now standard equipment on all newly manufactured vehicles. This protective barrier, however, can be breached by extremely high temperatures as well as by severe elements of the natural environment, such as acid rain and bird droppings. Because of all of these obstacles, it is essential to make use of additional exterior protection.
There are many benefits to using paint protection film, including:
– Protection from chips, scratches, and staining
– Easier to clean than unpainted surfaces
– Does not yellow or fade over time
– UV resistant
– Can be removed without damaging paint
Paint Protection Film: How Does it Work?
Paint protection film is applied to your car using a special acrylic adhesive that bonds the film securely to the paint. Once the film is in place, it forms a barrier between your paint and the elements, protecting your car’s finish from chips, scratches, and staining. The film is virtually invisible, so it won’t change the look of your car, and it can be removed at any time without damaging the paint.
Here’s a step-by-step guide on paint protection film installation:
- Clean the surface of your car with a mild soap and water solution.
- Using a measuring tape, measure and mark the areas where you want to apply the film.
- Cut the film to size using a razor blade or utility knife.
- Apply the film to the surface of your car, starting at one end and working your way to the other.
- Use a squeegee to remove any air bubbles that may have formed under the film.
- Trim any excess film from around the edges of the area you are covering.
- Allow the adhesive to cure for 24 hours before washing or waxing your car.
What Not To Do
There are a few things you should avoid doing after you’ve installed car paint protection film:
– Do not use harsh chemicals or abrasive cleaners on the film.
– Do not wax or polish the film.
– Do not steam clean the film.
– Do not expose the film to extreme heat or cold.
Should You Hire a Professional?
You can install paint protection film yourself, but it is a bit of a tricky process. If you’re not confident in your abilities, then it’s best to hire a professional to do it for you. A professional will have the tools and experience necessary to get the job done right, and they will also be able to help you troubleshoot any issues that may arise.
If you decide to install the film yourself, be sure to follow the instructions carefully and take your time. It’s also a good idea to practice on a piece of scrap material before you attempt to apply the film to your car. In addition, if you opt to apply a nano-ceramic coating of professional grade on top of the PPF, the combination can offer protection for a lifetime.
What Happens if the Film Gets Damaged?
If the film becomes damaged, it can be repaired or replaced. However, keep in mind that the film is not indestructible and will eventually need to be replaced. Should you decide to remove the film, it can be done so without damaging the paint underneath.
The painted surfaces of an automobile can be shielded against chips, scratches, and stains by using paint protection film, a transparent, adhesive-backed film. It is possible to remove the film at any moment without harming the paint because it is essentially undetectable. Paint protection film won’t fade or yellow if it’s put properly.
If you are looking for a way to protect your car’s paint job, then Buford GA paint protection film is a great option. It is easy to install, and it will not change the look of your car. Plus, it can be removed at any time if you decide that you no longer want it. So, does paint protection film work? The answer is yes!